.A G I L E USER AND TECHNICAL MANUAL.Rev 0 - 05-2008.DATI GENERALI.Manufacturer BRASILIA S.p.A. Strada Provinciale Bressana - Salice 27050 Retorbido (PV) Italy Tel. +39.0383.372011 Fax +39.0383.374450 e.mail: info@brasilia.it www.brasilia.it Model.AGILE.Stamp of local agent Rev. Data Note 05/2008 Document Issued.CONTENTS GENERAL INSTRUCTIONS.4 1.1 - Explanation of symbols.5 1.2 - Use foreseen.

• Brasilia Portofino Espresso Machine Manual

5 1.3 - Improper use. 5 CARACTERISTICS. 6 2.1 - Description of the machine.

6 2.2 - Technical specifications.7 UNPACKING AND PLACEMENT.CONTENTS 12 - USE. 19 12.1 - Starting the machine.19 12.2 - Coffee dispensing. 19 12.3 - General instructions for proper dispensing. 20 12.4 - Dispensing hot water.20 12.5 - Dispensing steam. 21 12.6 - Making cappuccino with the steam wand.Dear Madam, Dear Sir, Congratulations on choosing a BRASILIA coffee machine. Your new machine, which has innovative parts guaranteed by the know-how and experience of the Rossi group, has been built and tested using state-of-the-art research and technology methods in order to assure you quality and reliability in harmony with the environment and to enable you to operate with maximum efficiency and convenience.1.

GENERAL INSTRUCTIONS BRASILIA S.p.A. Has taken every possible measure to ensure that the equipment operates safely and efficiently. BRASILIA equipment comes with built-in safety devices to protect both users and authorised technicians. Read this manual carefully before installing the machine, starting it up and using it. Not doing so could cause damage to the equipment, poor performance by the machine and health risks or personal injury.

if the INSTALLER, or the MAINTENANCE TECHNICIAN, is not authorised and specialised;. The INSTALLER or MAINTENANCE TECHNICIAN should inform the manufacturer about ANY MALFUNCTIONS or improper uses that could adversely affect the original safety of the system. CHECK ON the condition of the parts and, if they are faulty, stop the installation and ask for them to be replaced.2.

CARACTERISTICS 2.1 - DESCRIPTION OF THE MACHINE The main features of the automatic espresso coffee machine are set out below. Automatic machine for making coffee with powder or with cartridges (on request), with dosage electronically controlled by a microprocessor unit and keyboard.

Boiler fills automatically Stainless steel body Boiler: For containing hot water and steam.litri litri Boiler capacity.11,4.18 Electric power supply.230V/50/1 - 3500W-15A.230V/50/1 - 5000W-22A 230V/60/1 - 3500W-15A.230V/60/1 - 5000W-22A 400V/50/2 - 3500W-15A.400V/50/2 - 5000W-22A 400V/50/3 - 4500W-19A.400V/50/3 - 5500W-24A 240V/50/1 - 3500W-15A.4. NAMES OF THE PARTS 9) Single filter holder 1) Coffee machine 10) Double filter (2/3 pieces) 2) Instruction manual 11) Single filter 3) Declaration of conformity 12) Blind filter 4) Drainpipe 14) Power cord 5) Delivery pipe 15) Water delivery connection 6) Measuring spoon 16) Water discharge connection 7) Presser.5. CONNECTIONS N.B.: the connecting up of the machine must be done by an authorised expert technician.

5.1 - WATER CONNECTION. Remove the basin (1) together with the cup-holder grid. Drainage There should be a drainpipe (2) with a siphon near the machine.5.2 - ELECTRIC POWER CONNECTION. Make sure that all the switches are in the OFF position before connecting the machine to the power. It is compulsory for the machine to be earthed and the system must be compliant with the regulations in force in the country of installation.” paragraph. Type of software. Switch off the machine by turning the knob (1) to OFF and turn off the water supply tap.

Brasilia Portofino Espresso Machine Manual

3D5 DL ECO REV.X.YY Revision AGILE Select Brewing Espresso Rev 1 - 05-2008 ENGLISH / 11.7. OPERATION Regulation of certain parts of the machine must be done by an authorised expert technician, with the machine in operation, taking great precaution. Start the machine as indicated in the paragraph on “Use”, lift up the cup-heater grid (1) and remove it so as to get at the inside parts of the machine.8. TECHNICAL PROGRAMMING This phase of programming must only be done by an expert, authorised technician.